fuzz coverage

// Copyright (c) 2009-2010 Satoshi Nakamoto

// Copyright (c) 2009-2022 The Bitcoin Core developers

// Distributed under the MIT software license, see the accompanying

// file COPYING or http://www.opensource.org/licenses/mit-license.php.

#include <bitcoin-build-config.h> // IWYU pragma: keep

#include <common/args.h>

#include <init.h>

#include <interfaces/chain.h>

#include <interfaces/init.h>

#include <interfaces/wallet.h>

#include <net.h>

#include <node/context.h>

#include <node/interface_ui.h>

#include <outputtype.h>

#include <univalue.h>

#include <util/check.h>

#include <util/moneystr.h>

#include <util/translation.h>

#include <wallet/coincontrol.h>

#include <wallet/wallet.h>

#include <walletinitinterface.h>

using node::NodeContext;

namespace wallet {

class WalletInit : public WalletInitInterface

{

public:

    //! Was the wallet component compiled in.

    bool HasWalletSupport() const override {return true;}

    //! Return the wallets help message.

    void AddWalletOptions(ArgsManager& argsman) const override;

    //! Wallets parameter interaction

    bool ParameterInteraction() const override;

    //! Add wallets that should be opened to list of chain clients.

    void Construct(NodeContext& node) const override;

};

void WalletInit::AddWalletOptions(ArgsManager& argsman) const

{

    argsman.AddArg("-addresstype", strprintf("What type of addresses to use (\"legacy\", \"p2sh-segwit\", \"bech32\", or \"bech32m\", default: \"%s\")", FormatOutputType(DEFAULT_ADDRESS_TYPE)), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-avoidpartialspends", strprintf("Group outputs by address, selecting many (possibly all) or none, instead of selecting on a per-output basis. Privacy is improved as addresses are mostly swept with fewer transactions and outputs are aggregated in clean change addresses. It may result in higher fees due to less optimal coin selection caused by this added limitation and possibly a larger-than-necessary number of inputs being used. Always enabled for wallets with \"avoid_reuse\" enabled, otherwise default: %u.", DEFAULT_AVOIDPARTIALSPENDS), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-changetype",

                   "What type of change to use (\"legacy\", \"p2sh-segwit\", \"bech32\", or \"bech32m\"). Default is \"legacy\" when "

                   "-addresstype=legacy, else it is an implementation detail.",

                   ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

    argsman.AddArg("-consolidatefeerate=<amt>", strprintf("The maximum feerate (in %s/kvB) at which transaction building may use more inputs than strictly necessary so that the wallet's UTXO pool can be reduced (default: %s).", CURRENCY_UNIT, FormatMoney(DEFAULT_CONSOLIDATE_FEERATE)), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-disablewallet", "Do not load the wallet and disable wallet RPC calls", ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

    argsman.AddArg("-discardfee=<amt>", strprintf("The fee rate (in %s/kvB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). "

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

                                                                "Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target",

                                                              CURRENCY_UNIT, FormatMoney(DEFAULT_DISCARD_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

    argsman.AddArg("-fallbackfee=<amt>", strprintf("A fee rate (in %s/kvB) that will be used when fee estimation has insufficient data. 0 to entirely disable the fallbackfee feature. (default: %s)",

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

                                                               CURRENCY_UNIT, FormatMoney(DEFAULT_FALLBACK_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

    argsman.AddArg("-keypool=<n>", strprintf("Set key pool size to <n> (default: %u). Warning: Smaller sizes may increase the risk of losing funds when restoring from an old backup, if none of the addresses in the original keypool have been used.", DEFAULT_KEYPOOL_SIZE), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-maxapsfee=<n>", strprintf("Spend up to this amount in additional (absolute) fees (in %s) if it allows the use of partial spend avoidance (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_MAX_AVOIDPARTIALSPEND_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-maxtxfee=<amt>", strprintf("Maximum total fees (in %s) to use in a single wallet transaction; setting this too low may abort large transactions (default: %s)",

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

        CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MAXFEE)), ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-mintxfee=<amt>", strprintf("Fee rates (in %s/kvB) smaller than this are considered zero fee for transaction creation (default: %s)",

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

                                                            CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MINFEE)), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

    argsman.AddArg("-paytxfee=<amt>", strprintf("(DEPRECATED) Fee rate (in %s/kvB) to add to transactions you send (default: %s)",

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

                                                            CURRENCY_UNIT, FormatMoney(CFeeRate{DEFAULT_PAY_TX_FEE}.GetFeePerK())), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

#ifdef ENABLE_EXTERNAL_SIGNER

    argsman.AddArg("-signer=<cmd>", "External signing tool, see doc/external-signer.md", ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

#endif

    argsman.AddArg("-spendzeroconfchange", strprintf("Spend unconfirmed change when sending transactions (default: %u)", DEFAULT_SPEND_ZEROCONF_CHANGE), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-txconfirmtarget=<n>", strprintf("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)", DEFAULT_TX_CONFIRM_TARGET), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-wallet=<path>", "Specify wallet path to load at startup. Can be used multiple times to load multiple wallets. Path is to a directory containing wallet data and log files. If the path is not absolute, it is interpreted relative to <walletdir>. This only loads existing wallets and does not create new ones. For backwards compatibility this also accepts names of existing top-level data files in <walletdir>.", ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::WALLET);

    argsman.AddArg("-walletbroadcast",  strprintf("Make the wallet broadcast transactions (default: %u)", DEFAULT_WALLETBROADCAST), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-walletdir=<dir>", "Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>)", ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::WALLET);

#if HAVE_SYSTEM

    argsman.AddArg("-walletnotify=<cmd>", "Execute command when a wallet transaction changes. %s in cmd is replaced by TxID, %w is replaced by wallet name, %b is replaced by the hash of the block including the transaction (set to 'unconfirmed' if the transaction is not included) and %h is replaced by the block height (-1 if not included). %w is not currently implemented on windows. On systems where %w is supported, it should NOT be quoted because this would break shell escaping used to invoke the command.", ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

#endif

    argsman.AddArg("-walletrbf", strprintf("Send transactions with full-RBF opt-in enabled (RPC only, default: %u)", DEFAULT_WALLET_RBF), ArgsManager::ALLOW_ANY, OptionsCategory::WALLET);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-unsafesqlitesync", "Set SQLite synchronous=OFF to disable waiting for the database to sync to disk. This is unsafe and can cause data loss and corruption. This option is only used by tests to improve their performance (default: false)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::WALLET_DEBUG_TEST);

    argsman.AddArg("-walletrejectlongchains", strprintf("Wallet will not create transactions that violate mempool chain limits (default: %u)", DEFAULT_WALLET_REJECT_LONG_CHAINS), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::WALLET_DEBUG_TEST);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

    argsman.AddArg("-walletcrosschain", strprintf("Allow reusing wallet files across chains (default: %u)", DEFAULT_WALLETCROSSCHAIN), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::WALLET_DEBUG_TEST);

Line

Count

Source

1172

49.9k

#define strprintf tfm::format

}

bool WalletInit::ParameterInteraction() const

{

    if (gArgs.GetBoolArg("-disablewallet", DEFAULT_DISABLE_WALLET)) {

        for (const std::string& wallet : gArgs.GetArgs("-wallet")) {

            LogPrintf("%s: parameter interaction: -disablewallet -> ignoring -wallet=%s\n", __func__, wallet);

Line

Count

Source

266

0

#define LogPrintf(...) LogInfo(__VA_ARGS__)

Line

Count

Source

261

0

#define LogInfo(...) LogPrintLevel_(BCLog::LogFlags::ALL, BCLog::Level::Info, __VA_ARGS__)

Line

Count

Source

255

0

#define LogPrintLevel_(category, level, ...) LogPrintFormatInternal(__func__, __FILE__, __LINE__, category, level, __VA_ARGS__)

        }

        return true;

    }

    if (gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY) && 
gArgs.SoftSetBoolArg("-walletbroadcast", false)0
) {

        LogPrintf("%s: parameter interaction: -blocksonly=1 -> setting -walletbroadcast=0\n", __func__);

Line

Count

Source

266

0

#define LogPrintf(...) LogInfo(__VA_ARGS__)

Line

Count

Source

261

0

#define LogInfo(...) LogPrintLevel_(BCLog::LogFlags::ALL, BCLog::Level::Info, __VA_ARGS__)

Line

Count

Source

255

0

#define LogPrintLevel_(category, level, ...) LogPrintFormatInternal(__func__, __FILE__, __LINE__, category, level, __VA_ARGS__)

    }

    return true;

}

void WalletInit::Construct(NodeContext& node) const

{

    ArgsManager& args = *Assert(node.args);

Line

Count

Source

106

0

#define Assert(val) inline_assertion_check<true>(val, __FILE__, __LINE__, __func__, #val)

    if (args.GetBoolArg("-disablewallet", DEFAULT_DISABLE_WALLET)) {

        LogPrintf("Wallet disabled!\n");

Line

Count

Source

266

0

#define LogPrintf(...) LogInfo(__VA_ARGS__)

Line

Count

Source

261

0

#define LogInfo(...) LogPrintLevel_(BCLog::LogFlags::ALL, BCLog::Level::Info, __VA_ARGS__)

Line

Count

Source

255

0

#define LogPrintLevel_(category, level, ...) LogPrintFormatInternal(__func__, __FILE__, __LINE__, category, level, __VA_ARGS__)

        return;

    }

    auto wallet_loader = node.init->makeWalletLoader(*node.chain);

    node.wallet_loader = wallet_loader.get();

    node.chain_clients.emplace_back(std::move(wallet_loader));

}

} // namespace wallet

const WalletInitInterface& g_wallet_init_interface = wallet::WalletInit();